Description:
Washington, D.C., U.S.A.: United States Government Printing Office, 1999. Wraps show bumping, creasing and soilage on rear. Spine straight with vertical crease that does not affect textblock. Interior is tight and unmarked, but last few leaves have creases and edgewear resulting from a significant bump or careless storage. Approx total 600 pp (numbered by section).. First. Card. Good/No Jacket as Issued. 4to - over 9¾" - 12" tall. Manual.
Search Results: Applied Science from First Used Books
You searched for:
- Subject: Applied Science from First Used Books
Results 1 - 20 of 31
Acceptable Methods, Techniques and Practices : Aircraft Inspection and Repair, September 8, 1998 AC 43.13-1B/2A
by U.S. Department of Transportation Federal Aviation Administration
- Used
- good
- Paperback
- first
- Condition
- Used - Good
- Edition
- First
- Binding
- Paperback
- ISBN 13
- 9780160624490
- ISBN 10
- 0160624495
- Quantity Available
- 1
- Seller
-
Vancouver, British Columbia, Canada
- Item Price
-
NZ$43.46NZ$36.01 shipping to USA
Show Details
Item Price
NZ$43.46
NZ$36.01
shipping to USA
Blasters' Handbook
by Canadian Industries Limited
- Used
- very good
- Hardcover
- Condition
- Used - Very Good
- Edition
- Sixth
- Binding
- Hardcover
- Quantity Available
- 1
- Seller
-
Vancouver, British Columbia, Canada
- Item Price
-
NZ$110.50NZ$36.01 shipping to USA
Show Details
Description:
Montreal, PQ: Canadian Industries Limited Explosives Division, 1972. Light rubbing, bumping and shelfwear to boards. Interior tight and unmarked except small amount of light pencil underlining in first chapter. 545 pp.. Sixth. Cloth. Very Good/No Jacket. 8vo - over 7¾" - 9¾" tall.
Item Price
NZ$110.50
NZ$36.01
shipping to USA
[Clymer] Mariner Outboard Shop Manual 2-48 HO 1976 - 1984 (Includes Electric Motors)
by Lahue, Kalton C.
- Used
- Fine
- Paperback
- first
- Condition
- Used - Fine
- Edition
- First
- Binding
- Paperback
- ISBN 13
- 9780892874002
- ISBN 10
- 0892874007
- Quantity Available
- 1
- Seller
-
Vancouver, British Columbia, Canada
- Item Price
-
NZ$89.40NZ$36.01 shipping to USA
Show Details
Description:
Arleta, CA: Clymer Publns, 1984. The tiniest of handling wear to covers, would be as new except for what is thought to be fading of yellow color at front top edge (sunning). Spine is straight and uncreased. Interior is tight, unmarked, crisp, apparently unread. Stated first printing September 1984. 335 pp.. First. Pictorial Card. Fine/No Jacket as Issued. 4to - over 9¾" - 12" tall.
Item Price
NZ$89.40
NZ$36.01
shipping to USA
Stock Photo: Cover May Be Different
DSL: Simulation Techniques and Standards Development for Digital Subscriber Lines
by Chen, Walter Y.
- Used
- as new
- Hardcover
- first
- Condition
- As New
- Edition
- First
- Binding
- Hardcover
- ISBN 13
- 9781578700172
- ISBN 10
- 1578700175
- Quantity Available
- 1
- Seller
-
Vancouver, British Columbia, Canada
- Item Price
-
NZ$23.59NZ$36.01 shipping to USA
Show Details
Description:
Indfianapolis: Macmillan Technical, 1998. Miniscule rubbing, bumping or shelfwear. Spine straight and uncreased. Interior tight, unmarked, crisp. Remainder mark on lower edge.. First. Cloth. As New/No Jacket. 8vo - over 7¾" - 9¾" tall. Textbook.
Item Price
NZ$23.59
NZ$36.01
shipping to USA
Stock Photo: Cover May Be Different
Electronic Sensors for the Evil Genius: 54 Electrifying Projects
by Petruzzellis, Thomas
- Used
- very good
- Paperback
- Condition
- Used - Very Good
- Edition
- Reprint
- Binding
- Paperback
- ISBN 13
- 9780071470360
- ISBN 10
- 0071470360
- Quantity Available
- 1
- Seller
-
Vancouver, British Columbia, Canada
- Item Price
-
NZ$42.21NZ$36.01 shipping to USA
Show Details
Description:
U.S.A.: McGraw-Hill/TAB Electronics, 2006. No rubbing, bumping or shelfwear, but the corners have rolls. Spine straight and uncreased. Interior tight and unmarked. 330 pp.. Reprint. Pictorial Card. Very Good/No Jacket as Issued. 48mo - over 3" - 4" tall.
Item Price
NZ$42.21
NZ$36.01
shipping to USA
Handbook of Steel Drainage & Highway Construction Products. Canadian Edition
by American Iron and Steel Institute
- Used
- Paperback
- first
- Condition
- Used - Fine+
- Edition
- First Canadian
- Binding
- Paperback
- Quantity Available
- 1
- Seller
-
Vancouver, British Columbia, Canada
- Item Price
-
NZ$36.01NZ$36.01 shipping to USA
Show Details
Description:
Washington, D.C., U.S.A.: American Iron and Steel Institute, 1984. Miniscule rubbing, bumping or shelfwear to covers. Spine straight and uncreased. Interior tight and unmarked, crisp, appears unread. Faint line to lower edge which might be a remainder mark. 413 pp.. First Canadian. Trade Paperback. Fine+/No Jacket as Issued. 8vo - over 7¾" - 9¾" tall.
Item Price
NZ$36.01
NZ$36.01
shipping to USA
How Things Work 1 & 2: The Universal Encyclopedia of Machines
- Used
- near fine
- Paperback
- Condition
- Used - Near Fine
- Edition
- Reprint
- Binding
- Paperback
- Quantity Available
- 1
- Seller
-
Vancouver, British Columbia, Canada
- Item Price
-
NZ$22.35NZ$36.01 shipping to USA
Show Details
Description:
UK: Paladin, 1974. Miniscule rubbing, bumping or shelfwear to covers, though front and rear show age discoloration. Spines straight with vertical creases that do not affect textblock. Interior tight and unmarked, though moderately tanning. 590 pp, 591 pp.. Reprint. Trade Paperback. Near Fine/No Jacket as Issued. 8vo - over 7¾" - 9¾" tall.
Item Price
NZ$22.35
NZ$36.01
shipping to USA
Instrument Engineers' Handbook: Volume I, Process Measurement & Volume II, Process Control
by Liptak, Bela G. (editor)
- Used
- Fine
- Hardcover
- first
- Condition
- Used - Fine
- Edition
- First
- Binding
- Hardcover
- ISBN 13
- 9780801955198
- ISBN 10
- 080195519X
- Quantity Available
- 1
- Seller
-
Vancouver, British Columbia, Canada
- Item Price
-
NZ$160.17NZ$36.01 shipping to USA
Show Details
Description:
Philadelphia: Chilton, 1969. Brown covers with gilt front and spine titles show miniscule amount of wear. Page faces show light thumbing. Spines are sound and hinges tight. Interiors are tight and unmarked. Vol II is dated 1970 and bears the ISBN 080195519X. Vol I = 1194 pp + foldout chart, Vol II = 1636 pp. Please note that these very heavy volumes will require extra postage.. First. Cloth. Fine/No Jacket. 8vo - over 7¾" - 9¾" tall. Textbook.
Item Price
NZ$160.17
NZ$36.01
shipping to USA
Introduction to Wood Design: A Learning Guide to Complement the Wood Design Manual 2002 Edition
by Canadian Wood Council
- Used
- Fine
- Paperback
- first
- Condition
- Used - Fine
- Edition
- First
- Binding
- Paperback
- ISBN 13
- 9780921628644
- ISBN 10
- 0921628641
- Quantity Available
- 1
- Seller
-
Vancouver, British Columbia, Canada
- Item Price
-
NZ$73.25NZ$36.01 shipping to USA
Show Details
Description:
Ottawa, ON: Canadian Wood Council, 2002. Miniscule rubbing, bumping or shelfwear to covers. No perforation splits at coil. Interior tight and unmarked except owner's name in ink on title page. . First. Card in Coil. Fine/No Jacket as Issued. 4to - over 9¾" - 12" tall.
Item Price
NZ$73.25
NZ$36.01
shipping to USA
Jefferson's Gas Welding Manual (Second Edition)
by Jefferson, Ted B.
- Used
- very good
- Paperback
- Condition
- Used - Very Good
- Edition
- Second
- Binding
- Paperback
- Quantity Available
- 1
- Seller
-
Vancouver, British Columbia, Canada
- Item Price
-
NZ$17.38NZ$36.01 shipping to USA
Show Details
Description:
Skokie, IL: Associated Business Counselors, 1959. Light wear to covers, creased upper right front, nick to leading edge rear, some thumbing and one small (1/2") stain lower front at spine. Interior tight and unmarked. 122 pp.. Second. Sewn and Glued in Card Wraps. Very Good/No Jacket. 12mo - over 6¾" - 7¾" tall.
Item Price
NZ$17.38
NZ$36.01
shipping to USA
Landslide Investigations: A Field Handbook for Use in Highway Location and Design
by Cleaves, Arthur B.
- Used
- very good
- Paperback
- first
- Condition
- Used - Very Good
- Edition
- First
- Binding
- Paperback
- Quantity Available
- 1
- Seller
-
Vancouver, British Columbia, Canada
- Item Price
-
NZ$48.42NZ$36.01 shipping to USA
Show Details
Description:
Washington: U.S. Government Printing Office, 1961. Minimal rubbing, bumping or shelfwear, but owner's name on front cover. Tiny crease lower front right. Staples tight and unrusted. Interior tight and unmarked. 67 pp.. First. Stapled Card. Very Good/No Jacket as Issued. 12mo - over 6¾" - 7¾" tall.
Item Price
NZ$48.42
NZ$36.01
shipping to USA
Learning Guide F: Test and Service Brake Systems, Automotive Mechanical Repair Apprenticeship
by British Columbia Ministry of Advanced Education
- Used
- as new
- Paperback
- first
- Condition
- As New
- Edition
- First
- Binding
- Paperback
- ISBN 13
- 9780771890901
- ISBN 10
- 0771890907
- Quantity Available
- 1
- Seller
-
Vancouver, British Columbia, Canada
- Item Price
-
NZ$29.80NZ$36.01 shipping to USA
Show Details
Description:
Richmond, BC Canada: British Columbia Ministry of Advanced Education, 1991. No rubbing, bumping or shelfwear. Spine straight and uncreased. Interior tight and unmarked, crisp, unread. Sectionally paginated.. First. Pictorial Card. As New/No Jacket as Issued. 4to - over 9¾" - 12" tall. Textbook.
Item Price
NZ$29.80
NZ$36.01
shipping to USA
Learning Guide B: Cut, Weld and Braze, Automotive Mechanical Repair Apprenticeship
by British Columbia Ministry of Advanced Education
- Used
- as new
- Paperback
- first
- Condition
- As New
- Edition
- First
- Binding
- Paperback
- ISBN 13
- 9780771890864
- ISBN 10
- 0771890869
- Quantity Available
- 1
- Seller
-
Vancouver, British Columbia, Canada
- Item Price
-
NZ$36.01NZ$36.01 shipping to USA
Show Details
Description:
Richmond, BC Canada: British Columbia Ministry of Advanced Education, 1991. No rubbing, bumping or shelfwear. Spine straight and uncreased. Interior tight and unmarked, crisp, unread. Sectionally paginated.. First. Pictorial Card. As New/No Jacket as Issued. 4to - over 9¾" - 12" tall. Textbook.
Item Price
NZ$36.01
NZ$36.01
shipping to USA
Learning Guide E: Test and Service Manual and Power Steering Systems, Automotive Mechanical Repair Apprenticeship
by British Columbia Ministry of Advanced Education
- Used
- as new
- Paperback
- first
- Condition
- As New
- Edition
- First
- Binding
- Paperback
- ISBN 13
- 9780771890895
- ISBN 10
- 0771890893
- Quantity Available
- 1
- Seller
-
Vancouver, British Columbia, Canada
- Item Price
-
NZ$23.59NZ$36.01 shipping to USA
Show Details
Description:
Richmond, BC Canada: British Columbia Ministry of Advanced Education, 1991. No rubbing, bumping or shelfwear. Spine straight and uncreased. Interior tight and unmarked, crisp, unread. Sectionally paginated.. First. Pictorial Card. As New/No Jacket as Issued. 4to - over 9¾" - 12" tall. Textbook.
Item Price
NZ$23.59
NZ$36.01
shipping to USA
Learning Guide D: Service Frames and Suspension Systems, Automotive Mechanical Repair Apprenticeship
by British Columbia Ministry of Advanced Education
- Used
- as new
- Paperback
- first
- Condition
- As New
- Edition
- First
- Binding
- Paperback
- ISBN 13
- 9780771890888
- ISBN 10
- 0771890885
- Quantity Available
- 1
- Seller
-
Vancouver, British Columbia, Canada
- Item Price
-
NZ$23.59NZ$36.01 shipping to USA
Show Details
Description:
Richmond, BC Canada: British Columbia Ministry of Advanced Education, 1991. No rubbing, bumping or shelfwear. Spine straight and uncreased. Interior tight and unmarked, crisp, unread. Sectionally paginated.. First. Pictorial Card. As New/No Jacket as Issued. 4to - over 9¾" - 12" tall. Textbook.
Item Price
NZ$23.59
NZ$36.01
shipping to USA
Learning Guide O: Test and Service Electrical Systems, Automotive Mechanical Repair Apprenticeship
by British Columbia Ministry of Advanced Education
- Used
- as new
- Paperback
- first
- Condition
- As New
- Edition
- First
- Binding
- Paperback
- ISBN 13
- 9780771890994
- ISBN 10
- 0771890990
- Quantity Available
- 1
- Seller
-
Vancouver, British Columbia, Canada
- Item Price
-
NZ$42.21NZ$36.01 shipping to USA
Show Details
Description:
Richmond, BC Canada: British Columbia Ministry of Advanced Education, 1991. No rubbing, bumping or shelfwear. Spine straight and uncreased. Interior tight and unmarked, crisp, unread. Sectionally paginated.. First. Pictorial Card. As New/No Jacket as Issued. 4to - over 9¾" - 12" tall. Textbook.
Item Price
NZ$42.21
NZ$36.01
shipping to USA
Learning Guide I: Test and Service Diesel Engines, Automotive Mechanical Repair Apprenticeship
by British Columbia Ministry of Advanced Education
- Used
- as new
- Paperback
- first
- Condition
- As New
- Edition
- First
- Binding
- Paperback
- ISBN 13
- 9780771890932
- ISBN 10
- 0771890931
- Quantity Available
- 1
- Seller
-
Vancouver, British Columbia, Canada
- Item Price
-
NZ$33.52NZ$36.01 shipping to USA
Show Details
Description:
Richmond, BC Canada: British Columbia Ministry of Advanced Education, 1991. No rubbing, bumping or shelfwear. Spine straight and uncreased. Interior tight and unmarked, crisp, unread. Sectionally paginated.. First. Pictorial Card. As New/No Jacket as Issued. 4to - over 9¾" - 12" tall. Textbook.
Item Price
NZ$33.52
NZ$36.01
shipping to USA
Learning Guide G: Perform Routine maintenance and Diagnostics, Automotive Mechanical Repair Apprenticeship
by British Columbia Ministry of Advanced Education
- Used
- as new
- Paperback
- first
- Condition
- As New
- Edition
- First
- Binding
- Paperback
- ISBN 13
- 9780771890918
- ISBN 10
- 0771890915
- Quantity Available
- 1
- Seller
-
Vancouver, British Columbia, Canada
- Item Price
-
NZ$23.59NZ$36.01 shipping to USA
Show Details
Description:
Richmond, BC Canada: British Columbia Ministry of Advanced Education, 1991. No rubbing, bumping or shelfwear. Spine straight and uncreased. Interior tight and unmarked, crisp, unread. Sectionally paginated.. First. Pictorial Card. As New/No Jacket as Issued. 4to - over 9¾" - 12" tall. Textbook.
Item Price
NZ$23.59
NZ$36.01
shipping to USA
Stock Photo: Cover May Be Different
Manufacturing in Real Time: Managers, Engineers and an Age of Smart Machines (with CD)
by Frontini, Gian; Kennedy, Scott
- Used
- very good
- Hardcover
- first
- Condition
- Used - Very Good
- Edition
- First
- Binding
- Hardcover
- ISBN 13
- 9780750677226
- ISBN 10
- 0750677228
- Quantity Available
- 1
- Seller
-
Vancouver, British Columbia, Canada
- Item Price
-
NZ$47.18NZ$36.01 shipping to USA
Show Details
Description:
Saint Louis, Missouri, U.S.A.: Butterworth-Heinemann, 2003. Boards show almost no rubbing, bumping or shelfwear. Spine is sound and hinges are tight. Interior is tight and unmarked. A very slight wrinkle at upper edge of front free endpaper and several succeeding leaves would indicate prior contact with moisture. CD is included. 206 pp.. First. Pictorial Boards. Very Good/No Jacket as Issued. 8vo - over 7¾" - 9¾" tall.
Item Price
NZ$47.18
NZ$36.01
shipping to USA
Metal-Work for Grades VII, VIII and IX
by Jones, Harry A.
- Used
- fair
- Paperback
- Condition
- Used - Fair
- Edition
- Reprint
- Binding
- Paperback
- Quantity Available
- 1
- Seller
-
Vancouver, British Columbia, Canada
- Item Price
-
NZ$18.62NZ$36.01 shipping to USA
Show Details
Description:
Toronto: Macmillan, 1944. Moderate rubbing, bumping, soiling and edgewear to wraps. Inner wraps have pencil and inked annotations. Interior is tight but tanned toward edges. One leaf has 1.5" tear at the top edge. Tests have been completed in fountain pen. 112 pp.. Reprint. Stapled Card. Fair/No Jacket as Issued. 8vo - over 7¾" - 9¾" tall. Textbook.
Item Price
NZ$18.62
NZ$36.01
shipping to USA
Didn’t find what you’re looking for?
Try adding this search to your want list. Millions of books are added to our site everyday and when we find one that matches your search, we’ll send you an email. Best of all, it’s free.
Add to Want List
Are you a frequent reader or book collector?
Join the Bibliophile's Club and save 10% on every purchase, every day — up to $20 savings per order!
Social Responsibility
Did you know that since 2004, Biblio has used its profits to build 16 public libraries in rural villages of South America?
